Figure 23: Locate Handsets via Web UI
Locate via DP752 Base station
1. On DP752 Base station front side, press Radio/Page button.
2. All registered Handsets will receive Paging call.
3. Once located, you can end the paging calling by pressing any key on the Handsets or by pressing
again Radio/Page button.
Register a SIP Account
DP752 supports up to 10 SIP accounts, 5 Handsets. Each Handsets can be configured up to 10 accounts.
Please be aware that line settings will be affected by DID settings (hunting group settings) in “DECT → SIP
Account Settings”.
To Next Page
Loading...
