RESTORE FACTORY DEFAULT SETTINGS
Warning:
Restoring the Factory Default Settings will delete all configuration information on the phone. Please backup
or print all the settings before you restore to the factory default settings. Grandstream is not responsible for
restoring lost parameters and cannot connect your device to your VoIP service provider.
Resetting the DP752 Base Station
Using Hardware Button
Long press the page button on the device about 30 seconds, until the device reboot.
Notes:
• The device will enter subscribe mode after about 8 seconds first, need keep pressing until factory
reset.
• Reset Type can be configured from [Configure Hardware Button].
From Web Interface
1. Access DP752 Web GUI.
2. Navigate to Maintenance → Factory Reset.
3. Select the Reset Type from the reset drop down list.
4. Press Reset button and the unit will prompt a confirmation message, press OK to reset, then the
unit restart automatically with parameters restored to default values or press Cancel to annul the
reset.
Resetting the DP730/DP722 Handsets
Please follow the instructions below to reset the DP730/DP722 Handsets:
1. Press “Menu” (left softkey or the selection key) to bring up operation menu.
2. Press arrow keys to move the cursor to Settings and then press “Select”.
3. Navigate to System Settings → Factory Reset, a warning window will pop out to make sure a
reset is requested and confirmed;
To Next Page
Loading...
Need help?
General
