other settings like account info, call settings, audio settings, etc., will be
reset.
3. DECT Settings Only: Reset only the subscription (wipe out all the
subscription information), but keep all the other settings like account, SIP
settings.
Specifies the type of reset to perform via the hardware/page button:
There are 3 reset type for Web UI button:
1. Full Factory Reset: Reset all the settings.
2. NVRAM Settings Only: Reset all the settings except subscription
information, so the Handsets will stay in subscribed after reset, but all the
other settings like account info, call settings, audio settings, etc., will be
reset.
3. DECT Settings Only: Reset only the subscription (wipe out all the
subscription information), but keep all the other settings like account, SIP
settings.
4. Disabled: Hardware button will act as page button only.