Grandstream Networks DP730 Administration Guide

P a g e | 73
DP752/DP730/DP722 Administration Guide
Version 1.0.11.4
Syslog Level
Selects log level; the level is one of DEBUG, INFO, WARNING, ERROR,
EXTRA DEBUG (default is NONE). Syslog messages are sent based on the
following events:
1. product model/version on boot up (INFO level)
2. NAT related info (INFO level)
3. sent or received SIP message (DEBUG level)
4. SIP message summary (INFO level)
5. inbound and outbound calls (INFO level)
6. registration status change (INFO level)
7. negotiated codec (INFO level)
8. Ethernet link up (INFO level)
9. SLIC chip exception (WARNING and ERROR levels)
10. memory exception (ERROR level)
The Syslog uses USER facility. In addition to standard Syslog payload, it
contains the following components: GS_LOG: [device MAC address] [error
code] error message. Example: May 19 02:40:38 192.168.1.14 GS_LOG:
[00:0b:82:00:a1:be][000] Ethernet link is up
Syslog Keyword
Filtering
Syslog will be filtered based on keywords provided. If you enter multiple
keywords, it should be separated by ','. Please Note: no spaces allowed.
Print SIP in Syslog
Includes full SIP messages in syslog.
Packet Capture
Status
Displays packet capture status. When user starts to capture trace file, it will
show “RUNNING” status, otherwise, it will show “STOPPED”.
With RTP Packets
Defines whether packet capture file contains RTP or not.
Default setting is No.
Factory Reset
Force Reboot
Kills active processes and forces the reboot of DP752 base station.
Configure Web UI Button
Reset Type
Specifies the type of reset to perform via the Web UI reset button:
There are 3 reset type for Web UI button:
1. Full Factory Reset: Reset all the settings.
2. NVRAM Settings Only: Reset all the settings except subscription
information, so the Handsets will stay in subscribed after reset, but all the

Grandstream Networks DP730 Specifications

General

Brand	Grandstream Networks
Model	DP730
Category	Cordless Telephone
Language	English