Grandstream Networks DP730 Administration Guide

P a g e | 72
DP752/DP730/DP722 Administration Guide
Version 1.0.11.4
Custom Time Zone Settings
Custom Time Zones
Enable or disable customized time zone. Default is Disabled.
UTC Offset
Offset is negative for time zone following UTC and positive for time zone
leading UTC (-12 to +14). Default is 0.
Second Offset
Offset for second time zone. Offset is negative for time zone following UTC and
positive for time zone leading UTC (-12 to +14). Default is 0.
DST Type
Set Daylight Savings Time by day or by week. Default is by week.
Start & End Times
Starting and ending times for the time zone.
Default Start is 2:0 ; Default End is 2:0.
Time zone settings by
week
- Start & End Months: Starting and ending months for the time zone.
Default Start is April; Default End is September.
- Start & End settings by week : Starting and ending settings by week for
the time zone.
Default Start is Sunday, Week 1 ; Default End is Sunday, Week1.
Time zone settings by
day
- Start & End settings by day:
Starting and ending settings by day (0-365) for the time zone.
Default Start is 1 ; Default End is 1.
Manual Time Settings
Manual Time
Disables/Enables manual time settings. Default is Disabled.
Year / Month / Day
Set the Year (2016-2037), Month (1-12) and Day (1-31) manually.
Hour : Minute
Enter hour (0-23), Minute (0-59) manually.
Syslog
Syslog Protocol
Default UDP. While SSH/TLS allows sending syslog through secured TLS
protocol to syslog server. Note: CA verification is required
Syslog Server
Sets IP address or URL of system log server. The server collects system log
information from the base station.
User may configure the Syslog port by adding it after the Syslog Server
address. When configured, the Syslog messages will be sent to this port
instead of the default syslog port. Default is 514.

Grandstream Networks DP730 Specifications

General

Brand	Grandstream Networks
Model	DP730
Category	Cordless Telephone
Language	English