Grandstream Networks DP730 Administration Guide

P a g e | 55
DP752/DP730/DP722 Administration Guide
Version 1.0.11.4
Silence
Suppression (VAD)
Allows detecting the absence of audio and conserves bandwidth by preventing the
transmission of "silent packets" over the network. Default is No.
Jitter Buffer Type
Selects jitter buffer type (Fixed or Adaptive) based on network conditions.
Jitter Buffer Length
• High (initial 200ms, min 40ms, max 600ms) Note: not all vocoders can meet
the high requirement.
• Medium (initial 100ms, min 20ms, max 200ms).
• Low (initial 50ms, min 10ms, max 100ms).
Voice Monitoring
Enable RTCP
Enables RTCP statistics and control information. Default settings is RTCP.
Call Settings
Early Dial
Sends an early INVITE each time a key is pressed when a user dials a number.
Otherwise, only one INVITE is sent after full number is dialed (user presses Dial
Key or after “no key entry timeout” expires). This option should be used only if there
is a SIP proxy configured and supporting “484 Incomplete Address” responses.
Otherwise, the call will likely be rejected by the proxy (with a 404 Not Found error).
Default is No.
This feature is NOT designed to work with and should NOT be enabled for direct
IP-to-IP calling.
Dial Plan Prefix
Adds specified prefix to dialed number.
Dial Plan
Dial Plan Rules:
1. Accept Digits : +,1,2,3,4,5,6,7,8,9,0, *, #, A,a,B,b,C,c,D,d ;
2. Grammar: x – any digit from 0-9;
a. xx+ - at least 2-digit number;
b. xx – exactly 2-digit number;
c. ^ - exclude;
d. . – wildcard, matches one or more characters
e. [3-5] – any digit of 3, 4, or 5;
f. [147] – any digit 1, 4, or 7;
g. <2=011> - replace digit 2 with 011 when dialing
h. <=1> - add a leading 1 to all numbers dialed, vice versa will
remove a 1 from the number dialed
i. | - or
• Example 1: {[369]11 | 1617xxxxxxx} –
Allow 311, 611, 911, and any 10-digit
numbers of leading digits 1617

Grandstream Networks DP730 Specifications

General

Brand	Grandstream Networks
Model	DP730
Category	Cordless Telephone
Language	English