Grandstream Networks DP730 Administration Guide

P a g e | 62
DP752/DP730/DP722 Administration Guide
Version 1.0.11.4
Layer 2 QoS 802.1p
Priority Value for RTP
media
Sets layer 2 QoS 802.1p priority value for RTP media.
Default is 0.
STUN Settings
Use STUN
Enables STUN. Default is No.
STUN server
Configures IP address or domain name of STUN server.
Only non-symmetric NAT routers work with STUN.
Number of STUN
Response Misses
Allowed
Specifies number of STUN response misses allowed
before restarting DHCP service. The minimum is 3 misses.
Keep-Alive Interval
Sends periodically a blank UDP packet to SIP server to
keep "ping hole" on the NAT router open. Default is 20
seconds.
UPnP Discovery
Settings
Enable UPnP
discovery
Enables/disables UPnP discovery feature. Default is Yes.
After enabled, if you have a PC in the same network of
DP752, you can browse it directly in your Network. Double
click the device will open its web GUI in your default
browser.
UPnP Discovery
Notify Interval
Specifies in seconds the interval to send out SSDP notifies.
Default settings is 30.
Network → Open VPN® Settings
OpenVPN® Enable
Enables/Disables the OpenVPN® feature.
Default settings is No.
OpenVPN® Server
Address
Configures the address of the OpenVPN® server.
OpenVPN® Port
Defines the port of the OpenVPN® server. Default is 1194.
OpenVPN®
Transport
Determines network protocol UDP or TCP used for OpenVPN®. Default is UDP.
OpenVPN® CA
Uploads the OpenVPN® CA.
OpenVPN®
Certificate
Uploads the OpenVPN® Certificate.
OpenVPN® Client
Key
Uploads the OpenVPN® Client Key.

Grandstream Networks DP730 Specifications

General

Brand	Grandstream Networks
Model	DP730
Category	Cordless Telephone
Language	English