DP752/DP730/DP722 Administration Guide
Version 1.0.11.4
Sets IP address or domain name of firmware server. The URL of the server that
hosts the firmware release. Default is fm.grandstream.com/gs.
Note: Make sure to not prepend address with "http://" or any other protocol.
Checks if firmware file is with matching prefix before downloading it. This field
enables user to store different versions of firmware files in one directory on the
firmware server.
Checks if firmware file is with matching postfix before downloading it. This field
enables user to store different versions of firmware files in one directory on the
firmware server.
Allow DHCP Option
43 and Option 66 to
Override Server
Obtains configuration and upgrade server’s information from DHCP server
using options 66 and 43.
Note: If DHCP Option 66 is enabled, the base will attempt downloading the
firmware file from the server URL provided by DHCP, even though Firmware
Server Path is left blank.
Specifies when the firmware upgrade process will be initiated:
• No: Base station will only do upgrade once at boot up.
• Yes, check for upgrade at random every X day(s): Specify a period in
days.
• Check for upgrade every X minute(s): Specify a period in minutes.
• Check for upgrade every day: Specify “Hour of the day (0-23)”.
• Check for upgrade every week: Specify “Hour of the day (0-23)” and “Day
of the week (0-6)”. Note: Day of week is starting from Sunday.
Default is No.
Random Interval
Start Time
Starting time for random interval in hours (0-23): minutes (0-59).
Random Interval
Stop Time
Stopping time for random interval in hours (0-23): minutes (0-59).
Defines the hour of the day to check the HTTP/TFTP server for firmware
upgrades.
Defines the day of the week to check HTTP/TFTP server for firmware
upgrades.
Decrypts the firmware file using specified key (32-digit in Hexadecimal) when
encrypted.
To Next Page
Loading...
Need help?
General
