DP752/DP730/DP722 Administration Guide
Version 1.0.11.4
Enable Handset
Config Upgrade
Checks to allow Handsets config upgrade for Handsets related settings.
Default is No.
Handset Config File
Prefix
If configured, only the Handsets configuration file with the matching encrypted
prefix will be downloaded and flashed into the device. Default prefix is ipei_
Handset Config File
Postfix
If configured, only the Handsets configuration file with the matching encrypted
postfix will be downloaded and flashed into the device.
Allow DHCP Option
43 and Option 66 to
Override Server
Obtains configuration and upgrade server’s information from DHCP server
using options 66 and 43.
Note: If DHCP Option 66 is enabled, the DP752 will attempt downloading the
firmware file from the server URL provided by DHCP, even though Config
Server Path is left blank.
Allow DHCP Option
120 to Override SIP
Server
Obtains configuration and update SIP server information from DHCP server
using options 120.
Note: If DHCP option 120 is enabled, the sip server setting can be changed
for profile 1.
Sends multicast “SUBSCRIBE” message for provisioning at booting stage,
used for PnP (Plug-and-Play) configuration. Default is Yes.
Specifies when provisioning process will be initiated:
• No: Base station will only request configuration files once at boot up.
• Yes, check for provisioning at random every X day(s): Specify a period
in days.
• Check for provisioning every X minute(s): Specify a period in minutes.
• Check for provisioning every day: Specify “Hour of the day (0-23)”.
• Check for provisioning every week: Specify “Hour of the day (0-23)” and
“Day of the week (0-6)”. Note: Day of week is starting from Sunday.
Default is No.
Random Interval
Start Time
Starting time for random interval in hours (0-23): minutes (0-59).
Random Interval
Stop Time
Stopping time for random interval in hours (0-23): minutes (0-59).
Defines the hour of the day to check the HTTP/TFTP server for configuration
file changes. Default is 1.
Defines the day of the week to check HTTP/TFTP server for configuration file
changes. Default is 1.