Grandstream Networks DP730 Administration Guide

P a g e | 89
DP752/DP730/DP722 Administration Guide
Version 1.0.11.4
▪ Parallel: In this mode, all phones ring concurrently. If one phone answers, the remaining available
phones can make new outgoing calls.
This section will describe how to configure hunting groups for incoming calls:
Below steps are considering that SIP accounts were previously registered.
1. Access the Web GUI of your DP752 using the admin’s username and password.
2. Press Login to access your settings.
3. Go to DECT → SIP Account Settings.
4. Set HS Mode depending on your needs to configure your hunting groups.
5. Press Save and Apply to save your settings.
Example:
In the example below Account 2 (3003) is assigned to HS1 and HS2, and the hunting group (HS Mode) is
set to Linear, so incoming calls to that account will make HS1 ringing first then if no answer within ring
timeout the HS2 will start ringing.
HS 1
HS 2
HS 3
HS 4
Incoming Call
HS 5
Call
answered
Line
Available
Line
Available
Line
Available
Line
Available

Grandstream Networks DP730 Specifications

General

Brand	Grandstream Networks
Model	DP730
Category	Cordless Telephone
Language	English