GRAPHTEC CE5000-120AP - 1.3 Assembling the Stand

1-6
Introduction
1.3 Assembling the Stand
Stand Construction
The stand is made up of the following parts.
Stand side bar x 2 (L/R) Center bar x 1
Alignment shaft x 1
Stopper x 2 (L/R)
Hexagonal socket bolt (M6) x 8
Allen wrench (M6) x 1
Stock shaft x 1
Basket Construction
The basket is made up of the following parts.
Sheet support pipe x 2
Sheet support pipe bracket x 2 Rubber cap x 4 Hexagonal socket bolt (M6) x 4
Sheet x 1