GRAPHTEC CE5000-120AP - 4.5 Raising and Lowering the Pen

4-8
Function Settings and Operations
4.5 Raising and Lowering the Pen
This function raises and lowers the pen.
(1) Press the (PAUSE) key to switch to PAUSE mode.
(2) Press the (NEXT) or (PREV.) key until the following menu is displayed.
PEN UP/DOWN
(3) Press the (ENTER) key to lower the pen, and press the (ENTER) key
again to raise it.
BLADE WARE SETUP
CUT LINE PAT.
TANGENTIAL
INIT. B
PEN UP SPEED
INITIAL FEED
AUTO PRE FEED
ADVANCED FUNC.
SETUP MENU
TEST
PEN UP/DOWN
FEED&CUT
CLEAR BUFFER