FC9000-UM-251-9370 8-59
8 Electrical Adjustment
(13) Press the F1 key to display the following menu.
(14) Press the F1 key to display the following menu.
(15) Press the F1 key to select the TOOL 1-2.
(16) The following menu is displayed. The adjustment tool is shown 1-2.
(17) Press the F2 key to display, the following menu is displayed.
Use the Position keys to move the pen to an open area to plot the adjustment pattern.
(18) Press the ENTER key to draw the cross marks by pen 1 and pen 2 as shown below.
Media feed
direction
Lines plotted by tool 2
Cross mark
plotted by
tool 1
Y
X
+Y -Y
+X
-X
To Next Page
Loading...
