GRAPHTEC FC9000-75 - Page 173

FC9000-UM-251-9370 9-16
9 TROUBLESHOOTING
Error
code
Error Display Verication item Cause Solution
E01028
Conrm the power
cable of optional
rewind motor shaft
is connecting to the
connector of rewind
motor shaft.
The power cable
of optional rewind
motor shaft is not
connecting to the
connector of rewind
motor shaft.
Connect it securely.
Conrm the power
cable of optional
rewind motor shaft is
not broken.
The power cable of
optional rewind motor
shaft is broken.
Replace the optional
rewind motor shaft if it is
broken.