GREE U-Match 5 SERIES UNIT SERVICE MANUAL
130
Removal of front panel
Note: Before removing the front panel, make sure power is cut off.
Step Picture Work instruction
5. Install the right side plate
Screw up the screws
around the right side plate.
Be careful to handle well the
clasps at the bottom of the
right side plate.
6. Install the front panel.
Install the front panel by
mounting on 6 clasps on its
both sides. Please note that
there is one screw on the
lower right side.
7. Install the grill.
Attach the grill back in place
and tighten up the screws.
8. Install the upper cover plate.
Tighten up the screws
around the upper cover
plate.