Model G0776 (Mfd. Since 7/14)
-61-
G4985—Machine Shop Practice-Vol. 1 - Book
G4986—Machine Shop Practice-Vol. 2 - Book
Karl Hans Moltrecht's two-volume work on metal-
working operations delivers the ultimate teaching
and reference tool for basic cutting operations,
layout work, lathe turning, drilling operations, taper
and angle turning, and boring work. Written to aid
the beginner as well as the experienced machinist
or engineer. Due to their nature, books are non-
returnable. Defective books will be replaced.
Figure 96. G4985 Machine Shop Practice Book.
T10118—Tailstock Digital Readout
Manage the exact depth of cut with your tailstock!
Both the scale and remote displays come with a
0.0005" (five ten-thousandths of an inch) resolu-
tion, inch or millimeter display, zero keys and ON/
OFF keys. The scale has an 8" range and its
display features ABS or INC mode and Hold key.
Displays read independently of each other, too!
You Have to
Make this Part
Figure 98. T10118 Tailstock Digital Readout.
Figure 99. G1070 Live Center Set.
G1070—MT3 Live Center Set
This live center set offers seven interchangeable
tips. High-quality needle bearings prolong tool life
and special tool steel body and tips are precision
ground. Supplied in wooden box.
H8396—Chambering a Championship Match
Barrel DVD
Follow master gunsmith, Gordy Gritters, as he
gives step-by-step instructions in the highly pre-
cise area of chambering a rifle barrel worthy of
championship match shooting. Gordy Gritters is
a Benchrest Gunsmith who specializes in build-
ing 1000 yard rifles. He has built several rifles
that hold world records and have won National
Championships. He is extremely meticulous and
gives up many of his "secrets" on this video!
Figure 97. H8396 Chambering a Championship
Match Barrel DVD.
Figure 100. High-pressure oil can for ball oilers.
H7616—Oil Can w/Plastic Nozzle
Perfect for lubricating the ball oilers found on your
machine, each can holds 5 ounces of oil.
To Next Page
Loading...
