Grundfos KP - User Manual

GRUNDFOS INSTRUCTIONS
KP, KPV, KPVS
Split-case centrifugal pumps
Installation and operating instructions

Grundfos KP Specifications

General

Brand	Grundfos
Model	KP
Category	Water Pump
Language	English

Summary

Receiving the Product

Installing the Product

Location and Foundation

Mechanical Installation

Details piping, inlet pipe selection, and connections.

Electrical Connection

Procedures for motor wiring, controllers, and VFDs.

Shaft Seals and Coupling Alignment

Information on shaft seals, stuffing boxes, and coupling alignment.

Starting Up the Product

Priming and Pre-start Checklist

Motor Direction of Rotation

Starting the Pump

Servicing the Product

Maintaining the Product

Disassembling the Pump

Steps for preparing and disassembling the pump.

Bearing, Seal, and Packing Replacement

Detailed instructions for replacing bearings, seals, and packing.

Reassembling the Pump

Steps for reassembling the pump after servicing.

Cross-Section and Parts Lists

Fault Finding the Product

Technical Data

Operating Conditions

Appendix: Seal and Bearing Replacement