ENGLISH
21
Automatic search programing (ASP)
Initiating the automatic search program
1 In the »TUNER« menu, press the »MENU« button on the remote control.
– The »TUNER MENU« appears.
2 In the »TUNER MENU« select the »PRESETS« item by pressing »A« or
»S« and then »OK« to confirm.
– The »TUNER PRESETS« menu appears.
3 From the »TUNER PRESETS« menu, select the »ASP SEARCH« item by
pressing »A« or »S« and then »OK« to confirm.
– The automatic search starts (the remote control display reads:
»SEARCHING...«) and the HiFi system looks for stations in the
following order: first RDS stations, then stations without RDS but with a
strong signal, finally stations with weak reception. The radio stations are
stored automatically.
– The HiFi display shows the current preset station number, »AS« (for
automatic search) and the frequency.
– When the automatic search has finished, the HiFi system switches to the
first radio station it finds.
Note:
If all the preset station numbers are full, the message »MEM FULL« briefly
appears in the HiFi display.
Checking stored radio stations
1 Select the preset station number by pressing »
9
« or »
8
«.
– The HiFi system display shows the preset station number and the frequency.
If the current station transmits RDS information you will also see the name
of the station.
Note:
You can now sort the radio stations into the order you prefer. For more
information on this see Page 46.
TUNER SETTINGS
_______________________________________________________________________
TUNER PRESETS
EDIT PRESETS
ASP SEARCH
ERASE MEMORY
BACK ļĻ
TUNER
SEARCHING...
MENU INFO DEL
TUNER MENU
RADIOTEXT
PRESETS
SEARCH MODE
BACK ļĻ
To Next Page
Loading...
Need help?
General
