ENGLISH
45
Tuning to a radio station using the manual station
search
1 In the »TUNER« menu, press the »MENU« button on the remote control.
– The »TUNER MENU« appears.
2 In the »TUNER MENU« select the »SEARCH MODE« item by pressing
»A« or »S« and then »OK« to confirm.
– The »TUNER SEARCH« menu appears.
3 From the »TUNER SEARCH« menu, select the »MANUAL MODE« item by
pressing »A« and then »OK« to confirm.
4 Start the station search by pressing »
9
« or »
8
« once.
– Each time you press the button the frequency changes by 25 kHz.
– If the HiFi finds a radio station the »%« symbol appears in the
display. The radio station is correctly tuned when the arrow is directly in
the middle.
Note:
If you keep pressing »
9
« or »
8
« on the HiFi the search speed increases.
If you also want to store mono radio stations with weak signals, you must
select the Mono setting (see Page 29).
5 Select »MEMO« to store the station.
– The radio station is assigned the next free preset number.
Note:
If all the preset station numbers are full, the message »MEM FULL« briefly
appears in the HiFi display.
For information on switching back to preset mode see the ”Selecting preset
mode” section on page 28.
SPECIAL SETTINGS
____________________________________________________________________
TUNER MENU
RADIOTEXT
PRESETS
SEARCH MODE
BACK ļĻ
TUNER SEARCH
MANUAL MODE
BACK ļĻ
TUNER
40
98:10 MHz
man
MENÜ INFO DEL
To Next Page
Loading...
Need help?
General
