52
MULTIPLE ROOM OPERATION
________________________________________________
Switching on a pair of loudspeakers
1 Press the »CONTROL« button on the remote control.
2 From the »CONTROL« menu, select the »SELECT ROOM« item by
pressing »A« and then »OK« to confirm.
3 From the »SELECT ROOM« menu, select the »ROOM 2« item by pressing
»A« or »S« and then »OK« to confirm.
4 Switch on the loudspeakers using the »
yy
VOLUME
xx
« button.
Installing additional remote contols
If you are using several pairs of loudspeakers you can also install additional
remote control units. These enable you to operate pairs of loudspeakers in
different rooms, regardless of where the HiFi is located.
1 Switch on the HiFi and all the loudspeakers.
2 Press the »CONTROL« button on the first remote control.
– The »CONTROL« menu appears.
3 From the »CONTROL« menu, select the »INSTALL« item by pressing
»A« and then »OK« to confirm.
4 From the »INSTALL« menu, select the »RC« item by pressing »A« and
then »OK« to confirm.
– The remote control display reads: »INSERT BATTERIES IN THE
NEW RC.
«.
5 Insert three batteries (3 x 1.5 V alkaline, LR6/AA/AM3) in the battery
compartment of the second remote control, making sure that the polarity is
correct.
– The second remote control is now ready for operation.
INSTALL 1
SPEAKERS
REPLACE SPEAKERS
RC
BACK ļĻ
INSTALL 1
INSERT BATTERIES
IN THE NEW RC.
To Next Page
Loading...
