Grundig RCD 2000 User Manual

ENGLISH
29
TUNER MODE
_____________________________________________________________________________
Selecting radio stations
1 Select the preset station number by pressing »
9
« or »
8
«.
– The preset station number appears in the HiFi display and the remote
control menu.
Note:
You cannot select a preset number previously assigned to a station which
was then deleted.
Stereo/Mono reception
If the HiFi is receiving an FM stereo station the »!« symbol will appear in its
display.
However, if the signal from the FM stereo station is weak, you can improve the
sound quality by switching to mono reception.
1 In the »TUNER« menu, press the »MENU« button on the remote control.
– The »TUNER MENU« appears.
2 In the »TUNER MENU« select the »MONO/STEREO« item by pressing
»A« or »S« and then »OK« to confirm.
– The »TUNER MODE« menu appears.
3 From the »TUNER MODE« menu, select the »MONO« item by pressing
»S« and then »OK« to confirm.
– The HiFi display reads » FM MONO «.
TUNER MENU
PTY SEARCH
MONO/STEREO
ANTENNA/CABLE
BACK ļĻ
TUNER MODE
STEREO
MONO
BACK ļĻ
TUNER
2
ANTENNE
MENÜ INFO DEL
TUNER
1
BAYERN 3
MENÜ INFO DEL

Grundig RCD 2000 Specifications

General

Brand	Grundig
Model	RCD 2000
Category	Stereo System
Language	English