ENGLISH
53
MULTIPLE ROOM OPERATION
________________________________________________
Replacing loudspeakers on the HiFi
If you replace a pair of loudspeakers, you must install the new pair on the
HiFi system in the same manner.
1 Press the »CONTROL« button on the remote control.
– The »CONTROL« menu appears.
2 From the »CONTROL« menu, select the »INSTALL« item by pressing
»A« or »S« and then »OK« to confirm.
3 From the »INSTALL« menu, select the »REPLACE SPEAKER« item by
pressing »A« or »S« and then »OK« to confirm.
4
Press
»+« or »
–
« to select the room containing the pair of loudspeakers
which were replaced, and then press »OK« to confirm.
5 Switch on the left loudspeaker of the new pair using the »POWER« button.
– The remote control display reads: »RCD LS1« and the orange indicator
in the »POWER« lights up, which means that the remote control and the
HiFi have detected the left loudspeaker.
6 Switch on the right loudspeaker of the new pair using the »POWER«
button.
– The remote control display reads: »RCD LS1 LS 2« and the orange
indicator in the »POWER« lights up, which means that the remote control
and the HiFi have detected the right loudspeaker.
Hint:
If the message »ALL SETS ON RCD LS1 LS 2« does not appear,
repeat the process from Step 1 onwards.
REPLACE SPEAKERS
SELECT ROOM: 1
BACK +
-
INSTALL
SPEAKERS
REPLACE SPEAKERS
RC
BACK ļĻ
To Next Page
Loading...
Need help?
General
