ENGLISH
43
SPECIAL SETTINGS
____________________________________________________
Tuning to an RDS radio station using the automatic
station search
1 In the »TUNER« menu, press the »MENU« button on the remote control.
– The »TUNER MENU« appears.
2 In the »TUNER MENU« select the »SEARCH MODE« item by pressing
»A« or »S« and then »OK« to confirm.
– The »TUNER SEARCH« menu appears.
3 From the »TUNER SEARCH« menu, select the »RDS MODE« item by
pressing »A« or »S« and then »OK« to confirm.
4 Start the station search by pressing »
8
« or »
9
«.
– The station search stops as soon as it has found an RDS radio station.
– The »%« symbol appears in the display. The HiFi checks whether the
station is already assigned to one of the preset station numbers and
displays the name of the station. If the radio station is not already stored in
the memory, store it now – see Step 5.
– After a short time the remote control menu shows the name of the station.
Note:
If the search did not locate the RDS radio station you wanted, press »
8
« or
»
9
« to resume the search.
5 Select »MEMO« to store the station.
– The radio station is assigned the next free preset number.
Note:
If all the preset station numbers are full, the message »MEM FULL« briefly
appears in the HiFi display.
For information on switching back to preset mode see the ”Selecting preset
mode” section on page 28.
TUNER MENU
RADIOTEXT
PRESETS
SEARCH MODE
BACK ļĻ
TUNER SEARCH
PRESET MODE
RDS MODE
AUTOMATIC MODE
BACK ļĻ
TUNER
13
BAYERN 3
RDS
MENÜ INFO DEL
To Next Page
Loading...
Need help?
General
