Grundig RCD 2000 - Audio Adjustments; Adjusting Volume; Bass, Treble, and Balance; Sound Settings Selection

ENGLISH
25
VOLUME AND TONE
________________________________________________________________
Adjusting the volume
1 Adjust the volume using »
yy
VOLUME
xx
«.
– The remote control display reads »VOLUME« followed by the level (from »0«
to »63«).
Note:
If you change the volume using »+« or »–« on the HiFi, this only affects the
loudspeakers in Room 1.
Adjusting the bass, treble and balance levels
1 Press the »SOUND« button on the remote control.
2 From the »SOUND« menu, select the »TONE CONTROL« item by pressing
»A« or »S« and then »OK« to confirm.
3 From the »TONE CONTROL« menu, select the required setting »TREBLE«,
»BASS« or »BALANCE« by pressing »A« or »S« and then »OK« to
confirm.
4 Use »+« or »
–
« to adjust the bass and treble levels, and »L« or »R« to
adjust the balance.
– The setting is saved automatically.
5 To make additional settings press »BACK« and repeat steps 3 and 4.
Sound settings
There are five different sound settings (FLAT, VOCAL, DISCO, JAZZ and USER),
which you can select according to the type of music you are listening to.
You will find more details on the next page.
1 Press the »SOUND« button on the remote control.
TONE CONTROL
TREBLE
BASS
BALANCE
BACK ļĻ
BALANCE
BALANCE: L 1
BACK L R
VOLUME
15