Grundig RCD 2000 - CD Playback Information; Playing Time Information

ENGLISH
37
CD MODE
____________________________________________________________________________________
»REPEAT TRACK«:
Select this function using »A« or »S« and press »OK« to confirm.
Select the track using »
9
« or »
8
«.
This track on the CD is replayed.
– The »(« symbol appears in the HiFi display.
»
REPEAT ALL«:
Select this function using »A« or »S«, press »OK« to confirm and »
R
«
to start playback.
All tracks on the CD or in the track memory are replayed.
– The »(« symbol appears in the HiFi display.
4 To end the repeat function, press »5«.
Note:
If you switch off the HiFi or change the input source, the Rpeat function is
deactivated.
Playing time information
The HiFi system display can show various information, including the elapsed
playing time of the track (Track Time), the playing time left on the current track
(Track Remaining) and the remaining playing time of the whole CD (Disc
Remaining).
1 In the »CD« menu, press the »MENU« button on the remote control.
2 In the »CD MENU«, select »TIME« by pressing »A« and then »OK« to
confirm.
– The »CD TIME« menu appears.
3 From the »CD TIME« menu, select the required item »TRACK TIME«,
»TRACK REMAINING« or »DISC REMAINING« by pressing »A« or
»S« and then »OK« to confirm.
CD REPEAT
REPEAT OFF
REPEAT TRACK
REPEAT ALL
BACK ļĻ
CD TIME
TRACK TIME
TRACK REMAINING
DISC REMAINING
BACK ļĻ