GW Instek GDS-1104B - Trigger:edge:slop; Trigger:delay:slop

GDS-1000B Programming Manual
122
Syntax
:TRIGger:LLEVel {<NRf> | ?}
Related
commands
:TRIGger:TYPe
Parameter
<NRf>
Low level value.
Return parameter
<NR3>
Returns the trigger low level.
Example
:TRIGger:LLEVel -3.30E-3
Sets the trigger low level to -330mV/mA.
:TRIGger:EDGe:SLOP
Description
Sets or queries the trigger slope.
Syntax
:TRIGger:EDGe:SLOP {RISe | FALL | EITher | ? }
Related
commands
:TRIGger:TYPe
Parameter
RISe
Rising slope
FALL
Falling slope
EITher
Either rising or falling slope
Return parameter
Returns the trigger slope.
Example
:TRIGger:EDGe:SLOP FALL
Sets the trigger slope to falling.
:TRIGger:DELay:SLOP
Description
Sets or queries the trigger slope for the delay
trigger.
Syntax
:TRIGger:DELay:SLOP {RISe | FALL | EITher | ? }
Related
commands
:TRIGger:TYPe
Parameter
RISe
Rising slope
FALL
Falling slope
EITher
Either rising or falling slope
Set
Query
Set
Query