GW Instek GDS-1104B - Datalog:source; Datalog:save

COMMAND DETAILS
155
:DATALOG:SOURce
Description
Sets or queries the data logging source channel.
Note
This command is only applicable when the
Datalog app is installed. See the Datalog user
manual for details.
Syntax
:DATALOG:SOURce {CH1~CH4|all|?}
Related
commands
:DATALOG:STATE
:DATALOG:SAVe
:DATALOG:INTerval
:DATALOG:DURation
Parameter/Return
parameter
CH1 ~CH4
Channel 1, 2, 3 or 4
all
All displayed channels.
Example
:DATALOG:SOURce CH1
Sets the source to CH1.
:DATALOG:SAVe
Description
Sets or queries the save format as image or
waveform.
Note
This command is only applicable when the
Datalog app is installed. See the Datalog user
manual for details.
Syntax
:DATALOG:SAVe {IMAGe|WAVEform|?}
Related
commands
:DATALOG:STATE
:DATALOG:SOURce
:DATALOG:INTerval
:DATALOG:DURation
Parameter/Return
parameter
IMAGe
Save as images.
WAVEform
Save as waveforms.
Set
Query
Set
Query