GW Instek GDS-1104B - DVM Commands

COMMAND DETAILS
145
DVM Commands
The DVM commands are only available when the optional DVM
app is installed.
:DVM:STATE ..............................................................145
:DVM:SOURce ...........................................................145
:DVM:MODe ..............................................................146
:DVM:VALue ..............................................................146
:DVM:STATE
Description
Sets or queries the DVM state to on or off.
Note
This command is only applicable when the DVM
app is installed. See the DVM app user manual for
details.
Syntax
:DVM:STATE {OFF | ON | ? }
Related
commands
:DVM:SOURce
:DVM:MODe
Parameter/
Return parameter
OFF
Turns the DVM off.
ON
Turns the DVM on.
Example
:DVM:STATE ON
Turns the DVM state on.
:DVM:SOURce
Description
Sets or queries the source of the DVM.
Note
This command is only applicable when the DVM
app is installed. See the DVM app user manual for
details.
Syntax
:DVM:SOURce {CH1|CH2|CH3|CH4|?}
Set
Query
Set
Query