GW Instek GDS-1104B - Save:waveform

GDS-1000B Programming Manual
138
Example
:SAVe:SETUp S1
Saves the current setup to Set1 in internal memory.
:SAVe:SETUp “Disk:/DS0001.SET”
Saves the current setup to DS0001.SET in the root
directory of the internal memory.
:SAVe:WAVEform
Description
Saves a waveform to internal memory or to a
designated file path.
Related
commands
:SAVe:WAVEform:FILEFormat
Syntax
:SAVe:WAVEform {CH1~REF4, REF<X> } |
{CH1~REF4, W1~W20} | {CH1~ALL, file path}
Parameter
CH1~REF4,
CH1~CH4, Math, REF1~4
<X>
1,2,3,4 (REF1, REF2, REF3, REF4)
W1~W20
Wave1~Wave20
ALL
All the displayed waveforms on screen.
File path
Saves the waveform(s) to disk or USB to
the specified file path. (LSF or CSV, but
note that detail CSV can’t be recalled to
the scope.)
Example 1
:SAVe:WAVEform CH1, REF2
Saves the channel1 waveform to REF2.
Example 2
:SAVe:WAVEform:FILEFormat LSF
:SAVe:WAVEform ALL, “Disk:/ALL001”
Sets the file format to LSF. A folder named
“ALL001” is created and saves all displayed
waveforms to the “ALL001” directory in the LSF
format.
Set