GW Instek GDS-1104B - Vertical Commands

COMMAND DETAILS
43
Vertical Commands
:CHANnel<X>:BWLimit .............................................. 43
:CHANnel<X>:COUPling ............................................ 44
:CHANnel<X>:DESKew .............................................. 44
:CHANnel<X>:DISPlay ............................................... 44
:CHANnel<X>:EXPand ............................................... 45
:CHANnel<X>:IMPedance? ........................................ 45
:CHANnel<X>:INVert ................................................. 46
:CHANnel<X>:POSition ............................................. 46
:CHANnel<X>:PROBe:RATio ..................................... 47
:CHANnel<X>:PROBe:TYPe ....................................... 47
:CHANnel<X>:SCALe ................................................. 47
:CHANnel<X>:BWLimit
Description
Sets or returns the bandwidth limit on/off.
Syntax
:CHANnel<X>:BWLimit {FULL | <NR3> | ?}
Parameter
<X>
Channel 1,2,3,4
FULL
Full bandwidth
<NR3>
Sets the bandwidth limit to a pre-defined
bandwidth.
20E+6: 20MHz
Return Parameter
<NR3>
Returns the bandwidth.
Full
Full bandwidth
Example
:CHANnel1:BWLimit 2.000E+07
Sets the channel 1 bandwidth to 20MHz.
Set
Query