GW Instek GDS-1104B - Acquire:filter; Acquire:filter:frequency

COMMAND DETAILS
39
:ACQuire:FILTer
Description
Turns the filter on/off or queries its status.
Note
This command is only applicable when the Digital
Filter app is installed. See the Digital Filter app
user manual for details.
Syntax
:ACQuire:FILTer {ON|OFF|?}
Parameter/
Return parameter
ON
Filter on.
OFF
Filter off.
Example
:ACQuire:FILTer?
OFF
Indicates that the filter is turned off.
:ACQuire:FILTer:FREQuency
Description
Sets or queries the filter frequency.
Note
This command is only applicable when the Digital
Filter app is installed. See the Digital Filter app
user manual for details.
Syntax
:ACQuire:FILTer:FREQuency {DEFault|<NRf>|?}
Parameter/
Return parameter
DEFault
Sets the filter frequency to the default.
<NRf>
Manually sets the filter frequency.
(1Hz ~ 500MHz)
Example
:ACQuire:FILTer:FREQuency 1
Sets the filter frequency to 1Hz.
Set
Query
Set
Query