GW Instek GDS-1104B - Display Commands; Display:intensity:graticule; Display:intensity:waveform

COMMAND DETAILS
69
Display Commands
:DISPlay:INTensity:WAVEform ................................... 69
:DISPlay:INTensity:GRATicule.................................... 69
:DISPlay:INTensity:BACKLight ................................... 70
:DISPlay:INTensity:BACKLight:AUTODim:ENAble ... 70
DISplay:INTENSITy:BACKLight:AUTODim:TIMe ..... 70
:DISPlay:PERSistence ..................................................71
:DISPlay:GRATicule .....................................................71
:DISPlay:WAVEform .................................................... 72
:DISPlay:OUTPut ........................................................ 72
:DISPlay:INTensity:WAVEform
Description
Sets or queries the waveform intensity level.
Syntax
:DISPlay:INTensity:WAVEform {<NRf> | ?}
Parameter
<NRf>
0.0E+0 to 1.0E+2 (0% to 100%)
Return Parameter
<NR3>
Returns the intensity.
Example
:DISPlay:INTensity:WAVEform 5.0E+1
Sets the waveform intensity to 50%.
:DISPlay:INTensity:GRATicule
Description
Sets or queries the graticule intensity level.
Syntax
:DISPlay:INTensity:GRATicule {<NRf> | ?}
Parameter
<NRf>
1.0E+0 to 1.0E+2 (10% to 100%)
Return Parameter
<NR3>
Returns the graticule intensity.
Example
:DISPlay:INTensity:GRATicule 5.0E+1
Sets the graticule intensity to 50%.
Set
Query
Set
Query