GW Instek GDS-1104B - Display:intensity:backlight; Display:intensity:backlight:autodim:enable; Display:intensity:backlight:autodim:time

GDS-1000B Programming Manual
70
:DISPlay:INTensity:BACKLight
Description
Sets or queries the intensity of the backlight
display.
Syntax
:DISPlay:INTensity:BACKLight {<NRf> | ?}
Parameter
<NRf>
1.0E+0 to 1.0E+2 (10% to 100%)
Return Parameter
<NR3>
Returns the backlight intensity.
Example
:DISPlay:INTensity:BACKLight 5.0E+1
Sets the backlight intensity to 50%.
:DISPlay:INTensity:BACKLight:AUTODim
:ENAble
Description
Sets or queries the display auto-dim function.
Syntax
:DISPlay:INTensity:BACKLight:AUTODim:ENAble
{OFF | ON | ?}
Parameter/
Return parameter
OFF
Turn auto-dim on.
ON
Turn auto-dim off.
Example
:DISPlay:INTensity:BACKLight:AUTODim:ENAble ON
Turns the auto-dim function on.
DISplay:INTENSITy:BACKLight:AUTODim
:TIMe
Description
Sets or queries the display auto-dim time.
Syntax
:DISPlay:INTensity:BACKLight:AUTODim:TIMe
{ <NR1> | ? }
Parameter/
Return parameter
<NR1>
1 ~ 180 minutes. Time in minutes.
Example
:DISPlay:INTensity:BACKLight:AUTODim:TIMe 10
Sets the auto-dim time to 10 minutes.
Set
Query
Set
Query
Set
Query