GW Instek GDS-1104B - Measure:frrdelay; Measure:frfdelay

COMMAND DETAILS
95
Example
:MEASure:SOURce1 CH1
:MEASure:CARea?
1.958E-03
Selects Channel 1, and then measures the area.
:MEASure:FRRDelay
Description
Returns the delay between the first rising edge of
source1 and the first rising edge of source2.
Syntax
:MEASure:FRRDelay{?}
Related
Commands
:MEASure:SOURce<X>
Return parameter
<NR3>
Returns the delay.
Chan Off
Indicates the source channel is not
activated.
Note
Select the two source channels before entering this
command.
Example
:MEASure:SOURce1 CH1
:MEASure:SOURce2 CH2
:MEASure:FRRDelay?
-4.68E-6
Select channel 1 and 2 as source1/2, and then
measure FRR.
:MEASure:FRFDelay
Description
Returns the delay between the first rising edge of
source1 and the first falling edge of source2.
Syntax
:MEASure:FRFDelay{?}
Related
Commands
:MEASure:SOURce<X>
Query
Query