GW Instek GDS-1104B - Measure:fffdelay; Measure:lrrdelay

COMMAND DETAILS
97
:MEASure:FFFDelay
Description
Returns the delay between the first falling edge of
source1 and the first falling edge of source2.
Syntax
:MEASure:FFFDelay{?}
Related
Commands
:MEASure:SOURce<X>
Return parameter
<NR3>
Returns the delay.
Chan Off
Indicates the source channel is not
activated.
Note
Select the two source channels before entering this
command.
Example
:MEASure:SOURce1 CH1
:MEASure:SOURce2 CH2
:MEASure:FFFDelay?
-8.89E-6
Select channel 1 and 2 as delay source1/2, and
then measure FFF.
:MEASure:LRRDelay
Description
Returns the delay between the first rising edge of
source1 and the last rising edge of source2.
Syntax
:MEASure:LRRDelay{?}
Related
Commands
:MEASure:SOURce<X>
Return parameter
<NR3>
Returns the delay.
Chan Off
Indicates the source channel is not
activated.
Note
Select the two source channels before entering this
command.
Query
Query