GW Instek GDS-1104B - Cursor:xy:polar:theta:delta; Cursor:xy:polar:theta:position<X; Cursor:xy:product:position<X

GDS-1000B Programming Manual
66
:CURSor:XY:POLar:THETA:POSition<X>
Description
Queries the polar angle for the specified cursor in
XY mode, where X can be either 1 or 2.
Syntax
:CURSor:XY:POLar:THETA:POSition<X>{?}
Parameter
<X>
1, 2 (Cursor 1, Cursor 2)
Return parameter
<NR3>
Returns the polar angle.
Example
:CURSor:XY:POLAR:RADIUS:POSition1?
8.91E+1
Returns the polar angle for cursor1 as 89.1˚.
:CURSor:XY:POLar:THETA:DELta
Description
Queries the polar angle delta between cursor1 and
cursor2.
Syntax
:CURSor:XY:POLar:THETA:DELta{?}
Return parameter
<NR3>
Returns the theta delta between cursor1
and cursor2.
Example
:CURSor:XY:POLar:THETA:DELta?
9.10E+0
Returns the delta as 9.1˚.
:CURSor:XY:PRODuct:POSition<X>
Description
Queries the product in XY mode for the specified
cursor, where x can be either 1 or 2.
Syntax
:CURSor:XY:PRODuct:POSition<X>{?}
Parameter
<X>
1, 2 (Cursor 1, Cursor 2)
Return parameter
<NR3>
Returns the product value of the Cursor1 or
Cursor2.
Query
Query
Query