GW Instek GDS-1104B - Acquisition Commands

COMMAND DETAILS
35
Acquisition Commands
:ACQuire:AVERage ...................................................... 35
:ACQuire:MODe ......................................................... 36
:ACQuire<X>:MEMory? .............................................. 36
:ACQuire:FILTer:SOURce ........................................... 38
:ACQuire:FILTer .......................................................... 39
:ACQuire:FILTer:FREQuency ...................................... 39
:ACQuire:FILTer:TRACking ......................................... 40
:ACQuire<X>:STATe? .................................................. 40
:ACQuire:RECOrdlength ............................................. 40
:HEADer .......................................................................41
:ACQuire:AVERage
Description
Selects or returns the number of waveform
acquisitions that are averaged in the average
acquisition mode.
Syntax
:ACQuire:AVERage {<NR1>| ?}
Related
Commands
:ACQuire:MODe
Parameter
<NR1>
2, 4, 8, 16, 32, 64, 128, 256
Note
Before using this command, select the average
acquisition mode. See the example below.
Example
:ACQuire:MODe AVERage
:ACQuire:AVERage 2
Selects the average acquisition mode, and sets the
average number to 2.
Set
Query