GW Instek GDS-1104B - Datalog:duration; Datalog:state

COMMAND DETAILS
157
:DATALOG:DURation
Description
Sets or queries the recording duration time in
minutes.
Note
This command is only applicable when the
Datalog app is installed. See the Datalog user
manual for details.
Syntax
:DATALOG:DURation {<NR1>|?}
Related
commands
:DATALOG:STATE
:DATALOG:SOURce
:DATALOG:SAVe
:DATALOG:INTerval
Parameter/Return
parameter
<NR1>
Sets returns the duration time in
discrete minutes:
5, 10, 15, 20, 25, 30, 60, 90, 120, 150,
180, 210, 240, 270, 300, 330, 360, 390,
420, 450, 480, 510, 540, 570, 600, 1200,
1800, 2400, 3000, 3600, 4200, 4800,
5400, 6000
Example
:DATALOG:DURation 10
Sets the recording duration to 10 minutes.
Set
Query