GW Instek GDS-1104B - Gonogo:script; Gonogo:source; Gonogo:violation

GDS-1000B Programming Manual
150
:GONogo:SOURce
Description
Sets the source for the Go/NoGo signal.
Syntax
:GONogo:SOURce {CH1|CH2|CH3|CH4|?}
Parameter/
Return Parameter
CH1~CH4
Example
:GONogo:SOURce CH1
Sets the source to CH1.
:GONogo:VIOLation
Description
Sets or returns actions for the Go/NoGo violations.
Syntax
:GONogo:VIOLation {STOP | CONTinue | ?}
Parameter/
Return Parameter
STOP
The waveform will be frozen.
CONTinue
Ignore the violation.
Example
:GONogo:VIOLation STOP
Sets violation action to STOP.
:GONogo:SCRipt
Description
Activates/Deactivates the Go/NoGo APP or
queries its state.
Syntax
:GONogo:SCRipt {OFF | ON | ?}
Parameter/
Return Parameter
ON
Turns Go/NoGo APP on.
OFF
Turns the Go/NoGo APP off.
Example
:GONogo:SCRipt?
>ON
The Go/NoGo script is on.
Set
Query
Set
Query
Set