GW Instek GDS-1104B - Trigger:runt:time; Trigger:risefall:slop; Trigger:risefall:when

GDS-1000B Programming Manual
126
:TRIGger:RUNT:TIMe
Description
Sets or queries the Pulse Runt trigger time.
Syntax
:TRIGger:RUNT:TIMe {<NRf> | ? }
Related
commands
:TRIGger:TYPe
:TRIGger:RUNT:WHEn
Parameter
<NRf>
Pulse runt time (4nS to 10S)
Return Parameter
<NR3>
Returns the runt time in seconds
Example
:TRIGger:RUNT:TIMe 4.00E-5
Sets the runt time to 40.0uS.
:TRIGger:RISEFall:SLOP
Description
Sets or queries the Rise & Fall slope.
Syntax
:TRIGger:RISEFall:SLOP {RISe | FALL | EITher | ?}
Parameter
RISe
Rising slope
FALL
Falling slope
EITher
Either rising or falling slope
Return parameter
Returns the rise & fall slope.
Example
:TRIGger:RISEFall:SLOP RISe
Sets the Rise & Fall slope to rising.
:TRIGger:RISEFall:WHEn
Description
Sets or queries the rise/fall trigger conditions.
Syntax
:TRIGger:RISEFall:WHEn {MOREthan | LESSthan |
EQual | UNEQual | ? }
Related
commands
:TRIGger:TYPe
:TRIGger:RISEFall:TIMe
Set
Query
Set
Query
Set
Query