GW Instek GDS-1104B - Page 146

GDS-1000B Programming Manual
146
Related
commands
:DVM:STATE
:DVM:MODe
Parameter/
Return parameter
CH1~CH4
Channel 1 to 4.
Example
:DVM:SOURce CH1
Sets the DVM source to channel 1.
:DVM:MODe
Description
Sets or queries the DVM mode.
Note
This command is only applicable when the DVM
app is installed. See the DVM app user manual for
details.
Syntax
:DVM:MODe {ACRMS|DC|DCRMS|DUTY|
FREQuency|?}
Related
commands
:DVM:SOURce
:DVM:STATE
Parameter/
Return parameter
ACRMS
Sets the mode to AC RMS
DC
Sets the mode to DC
DCRMS
Sets the mode to DC RMS
DUTY
Sets the mode to AC Duty
FREQuency
Sets the mode to AC frequency
Example
:DVM:MODe DUTY
Sets the DVM mode to DUTY.
:DVM:VALue
Description
Returns the measurement value of the selected
mode.
Note
This command is only applicable when the DVM
app is installed. See the DVM app user manual for
details.
Set
Query
Query