GW Instek GDS-1104B - Page 132

GDS-1000B Programming Manual
132
Return parameter
*ARMED
Indicates that the oscilloscope is
acquiring pretrigger information.
*AUTO
Indicates that the oscilloscope is in the
automatic mode and acquires data
even in the absence of a trigger.
*READY
Indicates that all pretrigger
information has been acquired and
that the oscilloscope is ready to accept
a trigger.
*SAVE
Indicates that the oscilloscope is in
save mode and is not acquiring data.
*TRIGGER
Indicates that the oscilloscope
triggered and is acquiring the post
trigger information.
Example
:TRIGger:STATe?
AUTO
The trigger is in auto mode.
:TRIGger:EXTERnal:PROBe:TYPe
Description
Sets or queries the external probe type.
Syntax
:TRIGger:EXTERnal:PROBe:TYPe { VOLTage | CURRent
| ? }
Related
commands
:TRIGger:EXTERnal:PROBe:RATio
Parameter
VOLTage
Voltage
CURRent
Current
Return parameter
Returns the probe type.
Example
:TRIGger:EXTERnal:PROBe:TYPe?
CURRENT
Set
Query