To Next Page

To Previous Page

GPP-3060/6030 User Manual

168

Command

:SEQUence[1|2]:TEMPlet:INTErval <value>

Function

Sets the time interval.

Description

<value> integer 1s to 300s.

Time interval is the duration period in accord with

each time parameter of the active selected templet.

Example

:SEQUence2:TEMPlet:INTErval 15

Sets the CH2 time interval as 15s. Pulse templet

does Not support this parameter.

Command

:SEQUence[1|2]:TEMPlet:INTErval?

Function

Queries the active time interval.

Example

:SEQUence2:TEMPlet:INTErval?

Queries the CH2 active time interval. Returns to an

integer between 1 to 300.

Command

:SEQUence[1|2]:TEMPlet:INVErt {ON|OFF}

Function

Enable or disable invert function of the active

selected templet.

Description

When enabling the invert function, invert the target

waveform in instrument first, and build timer

parameter. Invert function is available for Sine,

Pulse and Ramp templets only.

Example

:SEQUence2:TEMPlet:INVErt ON

Enable the invert function of active selected templet

for CH2.

Command

:SEQUence[1|2]:TEMPlet:INVErt?

Function

Queries whether the invert function under the

active selected templet is enabled.

GW Instek GPP-3060 User Manual

Questions and Answers: