GW Instek GPP-3060 - Page 174

GPP-3060/6030 User Manual
174
Example
:SEQUence2:MEMory:LOAD 1
Recalls the CH2 sequence output file of
SEQUENCE01 saved in the internal storage.
Command
:SEQUence[1|2]:USB:SAVE <dest>
Function
Saves the channel sequence output file to the
designated location of external storage. <dest>
indicates the designated location of external
storage with file format in either
usb:\<name>.CSV or usb:\<name>.SEQ. The file
name spans up to the max. 8 alphanumeric
characters. .CSV/.SEQ represents the suffix of
sequence output file name. Storage location can
not be designated when sequence function is
enabled.
Example
:SEQUence2:USB:SAVE USB:\R001.CSV
Saves the CH2 sequence output file, by the name
of ”R001.CSV”, to the external storage.
Command
:SEQUence[1|2]:USB:LOAD <dest>
Function
Recalls the channel sequence output file saved in
the designated location from external storage.
<dest> indicates the designated location of
external storage.
Example
:SEQUence2:USB:LOAD USB:\R001.CSV
Recalls the CH2 sequence output file, R001.CSV,
saved in the external storage.
Command
:TRIGger:IN[:ENABle]
{D0|D1|D2|D3|D4},{ON|OFF}
Function
Enables or disables the trigger input finction of the
specified data line.