6
Installing the switch
-
proof seal on a mounting screw on the chassis cover intact, and if you want to open
the chassis, contact H3C for permission. Otherwise, H3C shall not be liable for any consequence.
Figure 1 Hardware installation flow
Installing the switch in a 19-inch rack
Mounting brackets
Table 4 describes the mounting brackets applicable to the switch.
Table 4 Mounting brackets applicable to the switch
Switch model
Applicable mounting
brackets
Views
S5560S-28P-SI
S5560S-52P-SI
Mounting brackets A (provided) See A in Figure 2.
Start
Install the switch
Connect the grounding cable
Connect power cords
Verify the installation
Turn on the circuit breakers
Operating correctly?
Turn off the circuit
breakers
Troubleshoot the switch
Yes
No
End
Use removable
power modules?
No
Yes
Install power modules
To Next Page
Loading...
Need help?
General