H3C S5000V3-EI User Manual

83
IMPORTANT:
USB devices from different vendors vary in compatibilities and drivers. H3C does not guarantee
correct operation of USB devices from all vendors on the
S5560S-28DP-SI
switch. If a USB device
fails to operate on the switch, replace it with one from another vendor.
10/100BASE-T autosensing Ethernet port
The S3100V3-SI switch series provides 10/100 BASE-T autosensing Ethernet ports.
Table 26 10/100BASE-T autosensing Ethernet port specifications
Item Specification
Connector type RJ-45
Port attribute 10/100 Mbps, half/full duplex, MDI/MDI-X autosensing
Max transmission distance 100 m (328.08 ft)
Transmission medium Category-5 and above twisted pair cable
Compatible standards IEEE 802.3i, 802.3u, 802.3ab
10/100/1000BASE-T autosensing Ethernet port
Table 27 10/100/1000BASE-T autosensing Ethernet port specifications
Item Specification
Connector type RJ-45
Port attribute
• 10 Mbps, half/full duplex
• 100 Mbps, half/full duplex
• 1000 Mbps, full duplex
• MDI/MDI-X autosensing
Max transmission distance 100 m (328.08 ft)
Transmission medium Category-5 (or above) twisted pair cable
Compatible standards IEEE 802.3i, 802.3u, 802.3ab
SFP port
The S5560S-28P-SI switch, S5560S-52P-SI switch, S5560S-28F-SI switch, S5560S-28DP-SI,
S5130S-28F-SI switch, S5130S-28S-HPWR-LI, S5120V2-SI switch series, S5120V2-LI switch
series, S5110V2-SI switch series, S5000V3-EI switch series, S5500V3-SI switch series, and
S3100V3-SI switch series provide SFP ports. The SFP ports on these switches support GE SFP
transceiver modules and cables described in Table 28.
Only the following SFP ports and switches support FE SFP transceiver modules described in Table
29.
•
All SFP ports on the S5560S-28F-SI, S5130S-28F-SI, S5130S-28S-HPWR-LI,
S5120V2-28P-HPWR-LI, and S3100V3-28TP-PWR-SI switches.
•
SFP ports 17 to 24 on an S5560S-28DP-SI switch.
•
SFP ports 9 and 10 on an S5120V2-12TP-HPWR-LI switch.

H3C S5000V3-EI Specifications

General

Brand	H3C
Model	S5000V3-EI
Category	Switch
Language	English