H3C S5130S-EI series Installation Guide

3-26
3 Accessing the switch for the first time
Connecting the switch to a configuration terminal
The following switch models each provide a serial console port and a micro USB console port. You
can access the switch from either port. If you connect both ports, only the micro USB console port is
available.
•
S5130S-28TP-EI
•
S5130S-52TP-EI
•
S5130S-16S-PWR-EI
•
S5130S-16S-UPWR-EI-Q
•
S5130S-28S-EI
•
S5130S-28S-EI-M
•
S5130S-28S-EI-DP
•
S5130S-52S-EI
•
S5130S-52S-EI-M
•
S5130S-28S-PWR-EI
•
S5130S-28S-HPWR-EI
•
S5130S-28S-HPWR-EI-Q
•
S5130S-28S-UPWR-EI-Q
•
S5130S-52S-PWR-EI
•
S5130S-52S-PWR-EI-AC
•
S5130S-28F-EI
•
S5130S-52F-EI
•
S5130S-28MP-EI
•
S5130S-10MS-UPWR-EI
•
S5130S-28MP-HPWR-EI
•
S5130S-52MP-EI
The other S5130S-EI switch models each provide only a serial console port.
In Figure3-1, the switch is connected to a configuration terminal (PC as an example) from the serial
console port.

H3C S5130S-EI series Specifications

General

Series	S5130S-EI
Category	Switch
MAC Address Table Size	16K
VLAN	4K VLANs
Management	Web, CLI, SNMP
Operating Temperature	0°C to 45°C
Storage Temperature	-40°C to 70°C
Operating Humidity	5% to 95% (non-condensing)
Ports	10/100/1000BASE-T ports
Layer Support	Layer 3
Stacking	Supported
Power Supply	AC/DC
PoE	Supported on some models
Dimensions (W x D x H)	440 x 43.6 mm