1-5
Model Product code (PID)
S5130S-52S-PWR-EI-AC LS-5130S-52S-PWR-EI-AC
S5130S-28MP-HPWR-EI
LS-5130S-28MP-HPWR-EI
LS-5130S-28MP-HPWR-EI-GL
S5130S-10MS-UPWR-EI
LS-5130S-10MS-UPWR-EI
LS-5130S-10MS-UPWR-EI-GL
S5130S-28ST-PWR-EI
LS-5130S-28ST-PWR-EI
LS-5130S-28ST-PWR-EI-GL
S5130S-52ST-PWR-EI
LS-5130S-52ST-PWR-EI
LS-5130S-52ST-PWR-EI-GL
Switches of the same model but different PIDs might differ in
hardware and software features.
You
can view the PID of a switch on the label located on its rear panel or top panel.
Technical specifications
Non-PoE switch models
Table1-2 Technical specifications for non-PoE switch models (1)
Item S5130S-10P-EI S5130S-12TP-EI S5130S-20P-EI
Dimensions (H ×
W × D)
43.6 × 266 × 161 mm
(1.72 × 10.47 × 6.34 in)
43.6 × 266 × 161 mm (1.72 ×
10.47 × 6.34 in)
43.6 × 330 × 230 mm
(1.72 × 12.99 × 9.06 in)
Weight ≤ 1.5 kg (3.31 lb) ≤ 1.5 kg (3.31 lb) ≤ 2 kg (4.41 lb)
Console port 1 × serial console port 1 × serial console port 1 × serial console port
10/100/1000BAS
E-T autosensing
Ethernet port
8
10 (The two highest-numbered
10/100/1000BASE-T
autosensing Ethernet ports
form combo interfaces with
their corresponding SFP ports,
respectively.)
16
SFP port 2
4 (The two lowest-numbered
SFP ports form combo
interfaces with their
corresponding
10/100/1000BASE-T
autosensing Ethernet ports,
respectively.)
4
Input voltage
• Rated voltage: 100 VAC to 240 VAC @ 50 or 60 Hz
• Max voltage: 90 VAC to 264 VAC @ 47 to 63 Hz
Minimum power
consumption
7 W 8 W 9 W
Maximum power
consumption
12 W 15 W 19 W
Chassis leakage
UL 62368-1/EN 62368-1/IEC 62368-1/UL 60950-1/EN 60950-1/IEC 60950-1/GB4943.1
To Next Page
Loading...
Need help?
General
