H3C S5130S-EI series - Page 64

1-14
Console port 1 × serial console port
10/100/1000B
ASE-T
autosensing
Ethernet port
24 48
28 (The four
highest-numbered
10/100/1000BASE-
T autosensing
Ethernet ports form
combo interfaces
with their
corresponding SFP
ports, respectively.)
48
SFP port 4 4
4 (Each and its
corresponding
10/100/1000BASE-
T autosensing
Ethernet port form a
combo interface.)
4
Input voltage
• Rated voltage:
100 VAC to 240
VAC @ 50 or 60
Hz
• Max voltage: 90
VAC to 264 VAC
@ 47 to 63 Hz
AC power source:
• Rated voltage: 100 VAC to 240 VAC
@ 50 or 60 Hz
• Max voltage: 90 VAC to 264 VAC @
47 to 63 Hz
DC power source: H3C RPS1600-A
• Rated voltage: –54 VDC to –57 VDC
• Max voltage:
 Single DC input: –44 VDC to –60
VDC
 AC and DC inputs: –54 VDC to –
57 VDC
• Rated
voltage: 100
VAC to 240
VAC @ 50 or
60 Hz
• Max voltage:
90 VAC to 264
VAC @ 47 to
63 Hz
Maximum PoE
power per port
30 W
The combo copper ports on an S5130S-28P-HPWR-EI switch do not support PoE power
supply.
Total PoE
power
• Models with
product code
LS-5130S-28P-
PWR-EI-H1:
240 W
• Other models:
170 W
• AC: 370 W
• DC: 740 W
AC: 370 W
DC: 740 W
370 W
Minimum
power
consumption
• Models with
product code
LS-5130S-28P-
PWR-EI-H1: 15
W
• Other
models:19 W
• AC: 36 W
• DC: 26 W
AC: 23 W
DC: 16 W
36 W
Maximum
power
consumption
(including PoE
power
consumption)
• Models with
product code
LS-5130S-28P-
PWR-EI-H1:
295 W
• Other models:
230 W
• AC: 467 W
• DC: 807 W
AC: 446 W
DC: 790 W
467 W
Chassis
leakage current
compliance
UL 62368-1/EN 62368-1/IEC 62368-1/UL 60950-1/EN 60950-1/IEC 60950-1/GB4943.1
Melting current
10 A/250 V 15 A/250 V 15 A/250 V 15 A/250 V