H3C S5560-EI series User Manual

70
Appendix B FRUs and compatibility matrixes
FRUs and compatibility matrixes
Table 13 FRUs and compatibility matrixes
FRUs
S5560-30S-EI
S5560-54S-EI
S5560-30F-EI
S5560-30C-EI
S5560-54C-EI
S5560-34C-EI
S5560-30C-PWR-EI
S5560-54C-PWR-EI
S5560-54QS-EI
Hot swappable power modules
PSR150-A1 Not supported Supported Not supported Supported
PSR150-D1 Not supported Supported Not supported Supported
PSR360-56A Not supported Not supported Supported Not supported
PSR720-56A Not supported Not supported Supported Not supported
PSR1110-56A Not supported Not supported Supported Not supported
Hot swappable fan trays
LSPM1FANSA Not supported Supported Supported Supported
LSPM1FANSB Not supported Supported Supported Supported
Expansion cards
LSWM2QP2P Not supported Supported Supported Not supported
LSWM2SP2PM Not supported Supported Supported Not supported
LSWM2SP8PM Not supported Supported Supported Not supported
LSWM2XGT2PM Not supported Supported Supported Not supported
LSWM2SP8P Not supported Supported Supported Not supported
LSWM2XGT8PM Not supported Supported Supported Not supported
LSPM6G4T6P Not supported Supported Supported Not supported
LSPM6FWD Not supported Supported Not supported Not supported
The PSR360-56A, PSR720-56A, PSR1110-56A, PSR150-A1, and PSR150-D1 power modules support
asset management. You can use the display device manuinfo command to view the name, sequence
number, and vendor of the power modules you have installed on the device.
You can install one power module, or two power modules for redundancy on the S5560-30C-EI,
S5560-34C-EI, S5560-30F-EI, S5560-54C-EI, and S5560-54QS-EI switches. These switches support mix
of an AC power module and a DC power module.

H3C S5560-EI series Specifications

General

Brand	H3C
Model	S5560-EI series
Category	Switch
Language	English